Home >

Searching for Euchips, Highlights Shenzhen OPPO Chain Store

News

Searching for Euchips, Highlights Shenzhen OPPO Chain Store 2018-09-27

With the excitement of Apple’s September 2018 Event now over, have you seen the iPhone X in the Apple Store? Today, let’s discuss iPhone X? Of course, no. Let’s continue to search for Euchips, highlights Shenzhen OPPO Chain Store which a new 0-10V/1-10V lighting project.

OPPO 1

Compared with traditional OPPO stores, Shenzhen OPPO Chain Store adopted modern lighting design with Euchips’ 0-10V/1-10V dimming solution to realize outdoor incredible lighting effect and indoor simple and comfortable lighting style.

OPPO 2

OPPO 3

OPPO 4

The whole lighting design was concerned with natural light, electric light or both to serve human needs. The store adopted Euchips’ phase & 0-10V dimming controller EUMA0405 and relay switch controller EUR0820 and constant current or constant voltages 0-10V/1-10V dimmable drivers working well with downlights, spotlights, wallwasher lights, etc. to realize scene control, scene switching, timer, dimming functions, etc..

OPPO 5

OPPO 6

OPPO 7

OPPO 8

OPPO 9

OPPO 10

OPPO 11

The bright impression of the entire area is inviting and indicates presence and openness.

OPPO 12

OPPO 13

Product Guides:

1. Phase Cut & 0-10V Dimming Controller EUMA0405

OPPO 14

Phase cut & 0-10V dimming controller EUMA0405 adopts advanced MOS-FET control technology, can accurately realize the phase cut function, and has no requirement for the type or capacity of load. The compatibility is far superior to leading edge controller.

Control mode of EUMA0405 is flexible, which complies with several control protocols:

1.1. support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access KNX, Dynalite, Lutron, Crestron, LDS and other intelligent dimming network via gateway.

1.2. support EU-BUS lighting control protocol developed by EUCHIPS. It can be used with relay switch controller, clock module, panel module, sensor module to achieve the group and scene control through the Euchips9 PC software. This solution is widely used in the family, conference rooms, hotels, schools, and other occasions.

1.3. support Touchdim, manual control, timing control function (optional). The user can manually turn ON/OFF or dim the brightness.

2. Relay Switch Controller EUR0820

OPPO 15

Relay Switch Controller EUR0820 adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM and DALI standard protocol. and output 8 relay control signal . The max current of each channel is 20A,the total 8 channel is 160A . In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below)

Features

2.1. Meets DMX512(1990)/RDM and DALI IEC62386 protocol

2.2. Feed-through power circuit design

2.3. Output relay controlled 8 channel, max current of each channel is 20A

2.4. Standard 35 mm din rail, convenient installation

2.5. There is an emergency button for each channel to switch on or off the channel

3. 0-10V/1-10V Constant Current LED Dimmable Driver EUP20A-1HMC-1

OPPO 16

EUP20A-1HMC-1 is a constant current output mode LED driver. The output current can be easily set via DIP switch, and the driver can be adjusted by the external 1-10VDC active signal, PWM signal, or adjustable resistance to achieve the smooth dimming effect.

Features

1. Single channel output, output current level selectable by DIP S.W.

2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)

3. High input voltage of 220VAC ~ 240VAC

4. High efficiency up to 85%

5. Built-in active PFC function

6. 100% output when no dimming signal input, can be used as normal power supply

7. Dimming effect smooth, no flicker

8. Protections: Short circuit, over load, over temperature

9. Suitable for indoor LED lighting application, such as down light, spot light, and so on

1-10V Constant Voltage LED Dimmable Driver EUP150A-1W24V-1

OPPO 17

Features

1. Signal channel constant voltage, 24V

2. Support 1-10V analog dimming signal, passive or active signal

3. Wide input voltage of 100-240VAC

4. High efficiency up to 90%

5. 100% output when no dimming signal input, can be used as normal power supply

6. Dimming effect smooth, no flicker

7. Over current protection, over voltage protection, short circuit protection

8. Suitable for indoor LED lighting application