Categories
-
DALI Series
- Constant voltage dimming drivers
- Constant current dimming drivers
- Low-voltage dimming drivers
- DALI-2 Constant current drivers
- DALI-2 Tunable White(DT8) drivers
- DALI input devices
- DALI controllers and power supplies
- DALI&0/1-10V Multi-input constant voltage dimming drivers
- DALI&0/1-10V Multi-input constant current dimming drivers
- Low-profile constant voltage IP67 dimming drivers
- Phase-Cut Series
- 0-10V/1-10V Series
- DMX Series
- Waterproof Series
- 48V DC-DC Drivers for Stucchi Magnetic Track Lights
- NA/UL Built-in drivers
- EU/CE Built-in drivers
- Wireless Series
- Control system devices
- Non-dimmable drivers
- Power Amplifiers
- Signal Converters
- Product Detail
- Send Inquiry
- Download
10W 120~350mA Phase-cut Constant Current LED Driver PUP10T-1LMC-350
PUP10T-1LMC-350 is a constant current output mode LED driver.The output current can be easily set via DIP switch.The driver supports leading edge (Triac) and trailing edge (ELV) dimmer, achieve a smooth dimming effect.
Features
1. Single channel output, output current level selectable by DIP S.W.
2. Support Leading edge (Triac) and Trailing edge (ELV) dimmer
3. Built-in active PFC function
4. Class Ⅱ power supply. Full protective plastic housing
5. Dimming effect smooth, no flicker
6. Protections: Short circuit, over load, over voltage
7. Suitable for indoor LED lighting application, such as down light, spotlights, panel light, and so on
Technical Parameters
Model | PUP10T-1LMC-350 | |
Input | Efficiency | 70%@120VAC, Full load |
Voltage | 120VAC | |
Frequency | 50/60Hz | |
Power Factor | 0.92@120VAC, Full load | |
THD | <20%@120VAC, Full load | |
Current | 0.13Amax@120VAC, Full load | |
Inrush Current | Cold start, 30A@230VAC | |
Output | Current/Voltage/Power |
120mA/9-42VDC/5.04W 150mA/9-42VDC/6.3W 180mA/9-42VDC/7.56W 210mA/9-42VDC/8.82W 250mA/9-40VDC/9.88W 300mA/9-33VDC/9.99W 320mA/9-31VDC/9.92W 350mA/9-28VDC/9.8W |
Ripple Current | <3% | |
Channel | 1 | |
Current Tolerance | ±5% | |
No Load Output Voltage | 50V Max | |
Turn On Delay Time | <1s, at 230Vac | |
Protection | Over voltage | Hiccup, recovers after fault condition is removed |
Short Circuit | Shut down the output automatically recovers after faulty condition is removed. | |
Over Load | When the output voltage is exceeded, decreases and, recovers automatically when the load is reduced. | |
Safety & EMC | Surge | L-N:0.5kV; |
Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | |
Safety standards | EN61347-2-13 | |
EMC Eission | EN55015 | |
EMC Immunity | EN61000-3-3 EN61000-4-3 EN61000-4-4 EN61000-4-5 | |
Function | Dimming type | Triac |
Dimming range | 3%-100% | |
Others | Working Temp. | -20℃~55℃ |
Storage Temp.; Humidity | -40℃~85℃, 20-90%RH | |
Tc | 90℃ | |
Material | PC | |
IP Rating | IP20 | |
Lifetime | 50,000h@tc:85℃ | |
Warranty Condition | 5 years | |
Switch Cycle | >25,000 times | |
Pack Information | N.W: 96g±5%/PCS; 100PCS/Carton; 10.1kg±5%/Carton; Carton Size: 398x210x208mm(L*W*H) | |
Dimension | 75*35*26.5mm(L*W*H) |
Browse Other Products
-
10W 120/180/240/300mA CC Driver
- Model: EUP10T-1HMC-0 - Output Current:120/180/240/300mA - Current Accuracy: ±5% - Maximum Output Voltage: 48VDC max - Output LF Current Ripple(<120Hz): <3% - Channels: 1 - ... -
10W 120~350mA CC Driver
- Model: EUP10T-1HMC-0-120 - Input voltage: 220-240VAC - Output Power: 10W - Output Channel: 1