Categories
-
DALI Series
- Constant Voltage Dimmable Drivers
- Constant Current Dimmable Drivers
- Constant Voltage DALI Decoders
- Constant Current DALI Decoders
- DALI2.0 CC Drivers
- DALI Tunable White(DT8)
- DALI Control Panels
- DALI Master controllers
- DALI&0-10V 2-in-1 CV
- DALI&0-10V 2-in-1 CC
- Ultra-thin Waterproof DALI Drivers
- DALI Relay
- Phase-Cut Series
- 0-10V/1-10V Series
- DMX Series
- Waterproof Series
- DC-DC Drivers
- US LED Drivers
- EU LED Drivers
- Wireless Series
- EU-BUS Controllers Series
- Non Dimmable LED Drivers Series
- LED Power Amplifiers Series
- Signal Converters Series
prev
next
- Product Detail
- Send Inquiry
- Download
75W 12VDC 6.2A*1ch 220-240VAC Constant Voltage DALI Driver EUP75D-1H12V-0
EUP75D-1H12V-0 is a constant voltage mode output LED driver and complies with DALI standard protocol IEC 62386. This driver can be connected to DALI main controller or Touch DIM to achieve a smooth dimming effect.
Features
1. Single channel constant voltage output, 6.2A max.
2. Meet DALI Protocol IEC62386
3. Support Touch DIM function
4. Wide input voltage of 220‐240VAC
5. Dimming effect smooth, no flicker
6. Over load protection; over voltage protection; short circuit protection; over temperature
7. IP20, Suitable for indoor LED lighting application
Technical Parameter
| Model | EUP75D-1H12V-0 | |
| Input | Efficiency | >85%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| Power Factor | ≥0.95@115VAC,Full load | |
| THD(full load) | <10%@230VAC, Full load | |
| AC Current(max) | 0.4Amax@230VAC | |
| Inrush Current(max) | Cold start 45A@230VAC | |
| Output | Current(A)/Voltage (VDC) Power(W) | 6.2A/12VDC/74.4W |
| R & N (Max) | 120mVp-p | |
| Channel | 1 | |
| Current Tolerance | ±3% | |
| Turn on delay Time | <1.5s, at230Vac (When the light begins to shine) | |
| Function | Dimming Type | DALI Dimming, Touch DIM |
| Dimming Range | 1%-100% Dimming to off | |
| Protection | Over voltage | Hiccup, recovers after fault condition is removed |
| Over temperature | Shut down and auto-restart after normal temperature | |
| Over load | Hiccup, recovers after fault condition is removed | |
| Short Circuit | Close output ,after fault removed the output current recovers automatically | |
|
Safety& EMC |
Surge | L-N:1KV |
| Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | |
| DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0 | |
| Safety Standards | EN61347, GB19510 | |
| EMC Emission | EN50515, EN61000-3-2 | |
| EMC Immunity | EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547 | |
| Others | Working Temp. | -20℃~50℃ |
| Storage Temp., Humidity | -40℃~85℃, 20-90%RH | |
| tc | 90℃ | |
| Material | Metal | |
| IP Rating | IP20 | |
| Lifetime | 30,000h@tc:80℃ | |
| Warranty Condition | 3 years | |
| Switch Cycle | >15,000 times | |
| Packing(weight) | Net weight: 460g±5%/PCS; 20PCS/Carton;10.5kg±5%/Carton; Carton Size: 244*223*199mm(L*W*H) | |
| Dimension | 213*54*33mm（L*W*H） | |
Browse Other Products
-
12W 12VDC 1A*1ch CV DALI Driver
- Model: EUP12D-1H12V-0 - Input Voltage: 220-240VAC - Output Power: 12W - Output Voltage: 12VDC - Output Current: 1A - Channels: 1 -
24W 24VDC 1A*1ch CV DALI Driver
- Model: EUP24D-1H24V-0 - Input Voltage: 220-240VAC - Output Power: 24W - Output Voltage: 24VDC - Output Current: 1A - Output Channels: 1