Categories
- Product Detail
- Send Inquiry
20W 350/500/550/700mA Constant Current DMX Driver EUP20M-1HMC-0
Feature
1. Single channel output, output current level selectable by DIP S.W.
2. Support DMX512/RDM
3. Wide range of input voltage 200VAC~400VAC
4. Bult-in active PFC function
5. Class 2 power supply. Full protective plastic housing
6. 100% output when no dimming signal input, can be used as normal power supply
7. Dimming effect smooth, no flicker
7. Protections: Short circuit, over load, over temperature
8. Suitable for indoor LED lighting application, such as down light, spotlights, panel light, and so on
Technical Parameter
|
Model |
EUP20M-1HMC-0 |
||||
|
Output
|
Current |
350mA |
500mA |
550mA |
700mA |
|
Voltage |
3-40VDC |
3-40VDC |
3-36VDC |
3-28VDC |
|
|
Power |
14W |
20W |
19.8W |
19.6W |
|
| Current Accuracy | ±5% | ||||
| No load output voltage | 50VDC | ||||
| Output LF current ripple(< 120 Hz) | ＜3% | ||||
| Channels | 1 | ||||
|
Input
|
Voltage |
220– 240VAC |
|||
|
Frequency |
50/60Hz |
||||
|
Current |
0.12Amax@230VAC |
||||
| Power factor | >0.95@230VAC,full load | ||||
|
Efficiency |
82%@230VAC,full load |
||||
|
Inrush Current |
Cold start,15A(twidth=22us measured at 50% Ipeak) @230VAC |
||||
|
Protection |
Short Circuit |
Close output, recovers automatically after fault removed |
|||
| Over Load | When the output voltage is exceeded, the output current decreases and, recovers automatically when the load is reduced | ||||
| Over Temperature | Shut down the output, recovers automatically when temp. back to normal | ||||
|
Function |
Dimming |
DMX512/RDM |
|||
|
Others
|
Dimension |
150*43*29 mm（L*W*H） |
|||
|
G.W |
120g |
||||
|
Working temp. |
-20℃ ~ 50℃ |
||||
|
Relative humidity |
20~90% RH |
||||
Browse Other Products
-
50W 500~1200mA CC DMX Driver
- Model: EUP50M-1WMC-0 - Output Current: 500~1200mA - Power: 50W - Current Accuracy: ±5% - No load output voltage: 90VDC - Output LF current ripple(< 120 Hz): ＜3% - Channels: 1 ...