Categories
-
DALI Series
- Constant voltage dimming drivers
- Constant current dimming drivers
- Low-voltage dimming drivers
- DALI-2 Constant current drivers
- DALI-2 Tunable White(DT8) drivers
- DALI input devices
- DALI controllers and power supplies
- DALI&0/1-10V Multi-input constant voltage dimming drivers
- DALI&0/1-10V Multi-input constant current dimming drivers
- Low-profile constant voltage IP67 dimming drivers
- Phase-Cut Series
- 0-10V/1-10V Series
- DMX Series
- Waterproof Series
- 48V DC-DC Drivers for Stucchi Magnetic Track Lights
- NA/UL Built-in drivers
- EU/CE Built-in drivers
- Wireless Series
- Control system devices
- Non-dimmable drivers
- Power Amplifiers
- Signal Converters
- Product Detail
- Send Inquiry
- Download
25W 350~700mA CC DALI2.0 Driver LTP25D-1HMC
LTP25D-1HMC is a 25W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. LTP25D-1HMC can be connected to DALI main controller to achieve a smooth dimming effect.
Features
1. Single channel output, output current level selectable via DIP S.W.
2. Meet DALI Protocol IEC 62386-207 Ed2.0
3. High efficiency up to 86%
4. Built-in active PFC function
5. Dimming effect smooth, no flicker
6. Protections: Short circuit, over load, no load
7. Compatible with all brands of 6 lines dimmable track
8. For luminaires of protection class II
9. 5-year guarantee
Technical Parameters
Model | LTP25D-1HMC | ||
Input | Efficiency | 86%@230VAC, Full load | |
Voltage | 220VAC-240VAC | ||
Frequency | 50/60Hz | ||
Power Factor | 0.95@230VAC,Full load | ||
THD(full load | <10%@230VAC, Full load | ||
AC Current(max) | 0.14Amax@230VAC | ||
Standby power | <0.5W | ||
Inrush Current(max) | Cold start,20A(twidth=70us measured at 50% Ipeak)@230VAC | ||
Output | Current(mA)/Voltage (VDC)/ Power(W) |
350mA/12-42VDC/14.7W 400mA/12-42VDC/16.8W 450mA/12-42VDC/18.9W 500mA/12-42VDC/21W 550mA/12-42VDC/23.1W 600mA/12-41VDC/24.6W 650mA/12-38VDC/24.7W 700mA/12-35VDC/24.5W |
|
Current Accuracy | ±5% | ||
No-load Output Voltage | 50VDC | ||
R&N(<120Hz) | <3% | ||
Protection | No load | The LED Driver will not be damaged. | |
Short Circuit | Close output, recovers automatically after fault removed | ||
Over load | Hiccup mode, recovers automatically after fault condition is removed | ||
Safety& EMC |
Surge | L-N:1KV | |
Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | ||
DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0 | ||
Safety Standards | IEC/EN61347-1,IEC/EN61347-2-13,GB19510.1,GB19510.14, | ||
EMC Eission | EN50515,EN61000-3-2 Class C,IEC61000-3-3,GB/T17743 | ||
EMC Immunity | EN61000-4-2,3,4,5,6,8,11 EN61547,GB17625.1 | ||
Function | Dimming Mode | DALI | |
Dimming Range | 0.1%-100% | ||
Others | Dimension | 260*42.5*32mm(L*W*H) | |
Packing Size | 488*294*188mm(L*W*H)/19kg/Carton/100PCS; | ||
G.W | 185g | ||
IP rating | IP20 | ||
Working Temp. | -20~45℃ | ||
Tc | 80℃ | ||
Relative Humidity | 20~90% RH | ||
Lifetime | 50000h@tc: 70℃ | ||
Switch Cycle | >100000times | ||
Max. allowed weight of complete luminaire | 5Kg |
Browse Other Products
-
10W 120/180/240/300mA*1ch CC DALI Driver
- Model: EUP10D-1HMC-0 - Input Voltage: 220–240VAC - Output Power: 10W - Output Current: 120/180/240/300mA - Channels: 1 -
10W 120~300mA*1ch CC DALI Driver
- Model: EUP10D-1HMC-0-120 - Input Voltage: 200–240VAC - Output Power: 10W - Output Current: 120/150/170/200/220/250/270/300mA - Channels: 1