Categories
-
DALI Series
- Constant Voltage Dimmable Drivers
- Constant Current Dimmable Drivers
- Constant Voltage DALI Decoders
- Constant Current DALI Decoders
- DALI2.0 CC Drivers
- DALI Tunable White(DT8)
- DALI Control Panels
- DALI Master controllers
- DALI&0-10V 2-in-1 CV
- DALI&0-10V 2-in-1 CC
- Ultra-thin Waterproof DALI Drivers
- DALI Relay
- Phase-Cut Series
- 0-10V/1-10V Series
- DMX Series
- Waterproof Series
- DC-DC Drivers
- US LED Drivers
- EU LED Drivers
- Wireless Series
- EU-BUS Controllers Series
- Non Dimmable LED Drivers Series
- LED Power Amplifiers Series
- Signal Converters Series
- Product Detail
- Send Inquiry
- Download
40W 500~850mA DALI Constant Current Driver PUP40D-1WMC-850
PUP40D-1WMC-850 is a constant current output mode LED driver. Support DALI dimming function, Touch DIM (Push DIM) function. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the users and luminaire system during installation.
Features
1. Single channel output, output current level selectable by DIP S.W.
2. Support DALI dimming function, Touch DIM (Push DIM) function
3. Input voltage of 120VAC ~ 277VAC
4. Dimming range: 0.1-100%，Dimming effect smooth, no flicker
5. Protections: Short circuit, Over load，Over voltage
6. Suitable for indoor LED lighting application
Technical Paramters
| Model | PUP40D-1WMC-850 | |
| Input | Voltage | 120VAC-277VAC |
| Frequency | 50/60Hz | |
| Efficiency | >87%@120VAC, Full load | |
| PF | ≥0.99@120VAC, Full load | |
| THD(full load) | <10%@120VAC, Full load | |
| Current | 0.6Amax@120VAC | |
| Inrush Current | Cold start,30A@120VAC | |
| Standby Power | <1W | |
| Output | Current/Voltage/Power |
500mA/9-48V/24W |
| Channel | 1 | |
| No load output voltage | 58V Max | |
| Frequency | 1KHz Min PWM | |
| Current Accuracy | ±5% | |
| LF current ripple(<120Hz) | <3% | |
| Protection | Over Voltage | Hiccup, recovers after fault condition is removed |
| Over load | Hiccup, recovers after fault condition is removed | |
| Short circuit | Close output, recovers automatically after fault removed | |
|
Safety& EMC |
Surge | L-N:1KV |
| Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA; I/P-Gnd: 1500VAC/1min/5mA; O/P-Gnd: 500VAC/1min/5m | |
| Safety standards | UL8750/UL1310/CSA25013,CSA class P | |
| EMC Eission | EN50515,EN61000-3-2 Class C,IEC61000-3-3 | |
| EMC Immunity | FCC class B(120V)/class A(277V) | |
| Others | Dimming type | DALI/Touch DIM (Push DIM) |
| Dimming range | 0.1%-100% Dimming to off | |
| Dimension | 121*44*26.5mm(L*W*H) | |
| Pack Information | Net weight: 156g±5%/PCS; 50PCS/Carton; 8.3kg±5%/Carton; Carton Size: 286x239x194mm (L*W*H) | |
| IP rating | IP20 | |
| Working temp. | -20℃~50℃ | |
| tc | 90℃ | |
| Relative humidity | 20~90% RH | |
| Lifetime | 50,000h@tc:85℃ | |
| Material | PC | |
| Switch cycle | >25,000 times | |
Browse Other Products
-
10W 120/180/240/300mA*1ch CC DALI Driver
- Model: EUP10D-1HMC-0(DALI2.0) - Input Voltage: 220–240VAC - Output Power: 10W - Output Current: 120/180/240/300mA - Channels: 1 -
10W 120~350mA DALI CC Driver
- Model: PUP10D-1WMC-350(DALI2.0) - Output Current: 120/150/180/210/260/290/320/350mA - Output Power: 10W - Output Channel: 1