Categories
-
DALI Series
- Constant voltage dimming drivers
- Constant current dimming drivers
- Low-voltage dimming drivers
- DALI-2 Constant current drivers
- DALI-2 Tunable White(DT8) drivers
- DALI input devices
- DALI controllers and power supplies
- DALI&0/1-10V Multi-input constant voltage dimming drivers
- DALI&0/1-10V Multi-input constant current dimming drivers
- Low-profile constant voltage IP67 dimming drivers
- Phase-Cut Series
- 0-10V/1-10V Series
- DMX Series
- Waterproof Series
- 48V DC-DC Drivers for Stucchi Magnetic Track Lights
- NA/UL Built-in drivers
- EU/CE Built-in drivers
- Wireless Series
- Control system devices
- Non-dimmable drivers
- Power Amplifiers
- Signal Converters
- Product Detail
- Send Inquiry
- Download
50W 800/900/1000/1050/1100/1200/1300/1400mA 0-10V/1-10V Constant Current Driver
EUP50A-1HMC-M is a constant current output mode LED driver. Support 0/1-10V Dimming function. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the users and luminaire system during installation.
Features
Single channel output, output current level selectable by DIP S.W.
Support 0/1-10V Dimming function
Dimming range: 0.1-100% Dimming effect smooth, no flicker
Protections: Short circuit, Over load
Suitable for indoor LED lighting applicatio
Technical Paramaters
| Model | EUP50A-1HMC-M | |
| Input | Efficiency | ≥88%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| Power Factor | ＞0.95@230VAC,Full load | |
| THD(full load) | <10%@230VAC, Full load | |
| Standby power | 0.5W | |
| AC Current(max) | 0.31Amax@230VAC | |
| Inrush Current(max) | Cold start,＜30A@230VAC | |
| Output | Current(mA)/Voltage (VDC)/Power(W) |
800mA/9-45V/36W 900mA/9-45V/40.5W 1000mA/9-45V/45W 1050mA/9-45V/47.25W 1100mA/9-45V/49.5W 1200mA/9-41V/49.2W 1300mA/9-38V/49.4W 1400mA/9-36V/50.4W |
| Ripple Current | <3% | |
| Channel | 1 | |
| Current Tolerance | ±5% | |
| Turn on delay Time | <1s, at 230Vac | |
| Function | Dimming Type | 0/1-10V/PWM/RX |
| Dimming Range | 0.1%-100% Dimming to off | |
| Protection | Short Circuit | Connect the LED power positive output and LED negative output terminal, together |
| Over Load | When the output voltage is exceeded, the output current decreases and, recovers automatically when the load is reduced. | |
|
Safety& EMC |
Surge | L-N>1KV |
| Withstand Voltage | I/P-O/P: 3750VAC/1min/10mA; | |
| Safety Standards | EN61347-1, EN61347-2-13 | |
| EMC Eission | EN55015, EN61000-3-2, EN61000-3-3 | |
| EMC Immunity | EN61000-4-2,3,4,5,6,8,11; EN61547 | |
| Others | Working Temp. | -20°C~+50°C, 20-50%RH |
| Storage Temp., Humidity | -40℃~85℃, 5-70%RH | |
| tc | 90℃ | |
| Material | PC | |
| IP Rating | IP20 | |
| Lifetime | 50,000h@tc:80℃ | |
| Warranty Condition | 5 years | |
| Switch Cycle | >25,000 times | |
| Packing(weight) | Net weight: --g±5%/PCS; --PCS/Carton; --kg±5%/Carton; Carton Size: --mm(L*W*H) | |
| Dimension | 185*42.5*28.5mm(L*W*H) | |
Browse Other Products
-
65W 700~1400mA*1ch CC 1-10V Driver
- Model: EULP65A-1HMC - Input Voltage: 220-240VAC - Output Power: 65W - Output Current: 700~1400mA - Channels: 1 -
35W 500~900mA*1ch CC 1-10V Driver
- Model: EULP35A-1HMC - Input Voltage: 220-240VAC - Output Power: 35W - Output Current: 500~900mA - Channels: 1