Categories
-
DALI Series
- Constant Voltage Dimmable Drivers
- Constant Current Dimmable Drivers
- Constant Voltage DALI Decoders
- Constant Current DALI Decoders
- DALI2.0 CC Drivers
- DALI Tunable White(DT8)
- DALI Control Panels
- DALI Master controllers
- DALI&0-10V 2-in-1 CV
- DALI&0-10V 2-in-1 CC
- Ultra-thin Waterproof DALI Drivers
- DALI Relay
- Phase-Cut Series
- 0-10V/1-10V Series
- DMX Series
- Waterproof Series
- DC-DC Drivers
- US LED Drivers
- EU LED Drivers
- Wireless Series
- EU-BUS Controllers Series
- Non Dimmable LED Drivers Series
- LED Power Amplifiers Series
- Signal Converters Series
- Product Detail
- Send Inquiry
- Download
DALI Tunable White Constant Current Diver EULP50D-2HMC-0
EULP50D-2HMC-0 is a LED controller that provides two channels outputs. The user can select the total output current via DIP switch.It supports DALI DT8 standard protocol and adjustment of brightness and colour temperature.
Features
1. Meet DALI Protocol IEC 62386 DT8
2. SELV. Full protective plastic housing
3. High efficiency up to 86 %
4. Built-in active PFC function
5. Dimming effect smooth, no flicker
6. Protections: Short circuit, over load, over temperature
7. The positive output of the two channels is common
8. Supports adjustment of brightness and colour temperature.
Technical Parameters| Model | EULP50D-2HMC-0 | |
| Input | Efficiency | >86%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz） | 50/60Hz | |
| Power Factor | ≥0.95@230VAC,Full load | |
| THD(full load | ＜10%@230VAC,full load | |
| AC Current(max) | 0.3Amax@230VAC | |
| Standby power | <0.5W | |
| Inrush Current | Cold start,18A(t width=14us measured at 50% I peak )@230VAC | |
| Output | Current(mA)/Voltage (VDC) Power(W) |
900mA/9-42VDC/40.5W 1050mA/9-42VDC/47.25W |
| Ripple Current | <3% | |
| Channel | 2 | |
| Current Tolerance | ±5% | |
| No load output voltage | 60Vdc | |
| Function | Dimming mode | DALI/Touch DIM |
| Dimming range | 1%~100% | |
| Protection | Short circuit | Close output，recovers automatically after fault removed |
| Over load | When the output voltage is exceeded, the output current decreases and, recovers automatically when the load is reduced. | |
| Over temperature | Shut down the output, recovers automatically when temp. back to normal. | |
| Safety & EMC | Surge | L-N:1000V |
| Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | |
| DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-209, DALI 1.0 | |
| Safety Standards | EN61347, GB19510 | |
| EMC Eission | EN50515, EN61000-3-2 | |
| EMC Immunity | EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547 | |
| Others | Working Temp. | -20℃~50℃ |
| Storage Temp., Humidity | -40℃~85℃, 20-90%RH | |
| tc | 85℃ | |
| Material | Metal | |
| IP Rating | IP20 | |
| Lifetime | 30,000h@tc:80℃ | |
| Warranty Condition | 3 years | |
| Switch Cycle | >15000 times | |
| Packing(weight) | Net weight: 305g±5%/PCS; 50PCS/Carton; 15.75kg±5%/Carton; Carton Size:370*326*127mm(L*W*H) | |
| Dimension | 360*30*21mm（L*W*H） | |
Browse Other Products
-
200W 48VDC 4.16*2ch CV DALI Driver
- Model: LCP200D-2H48V - Input voltage: 220VAC-240VAC - Output power: 200W - Output Voltage: 48VDC - Output current: 4.16 - Output Channel: 2 -
150W 24VDC 6.25A*2ch CV DALI Driver
- Model: LCP150D-2W24V - Input voltage: 120VAC-277VAC - Output power: 150W - Output Voltage: 24VDC - Output current: 6.25A - Output Channel: 2