Categories
- Product Detail
- Send Inquiry
- Download
RS485 Network Bridge EUB01
The EUB01 is a flexible network communications bridge designed for RS-485 networks. The two optoisolated RS-485 ports enable the EUB01 to implement a trunk and spur topology on large project sites. The EUB01 can not only extend the communication distance, make the bus network flexible and convenient, but also can isolate the dry electrical fault network.
Due to the extension of transmission distance, or the increase the number of serial device, it makes the serial signal continuous attenuation,this will lead to may lead to bus signal instability or even can not be used, EUB01 network bridge can enhance and amplify the existing bus signal, increase the number of serial port equipment in bus network. EUB01 serial data using half duplex bidirectional transmission, the transmission distance is 1200 meters.
Technical Parameters
Power supply | 12VDC 10mA,supplied via controller signal port |
Serial ports | 2*RS485 |
Isolation Voltage | 3.75KV isolation |
Power indication | LED continuous on |
Communication indication | LED flashing |
Baud rate | 9600 |
Recommended cable | 2*twisted-shielded pair of 1.0 mm 2 (18AWG) |
Operational temp | 0-50℃ |
Standard compliant | CE |
Dimension | 112*35*67(L*W*H) mm |
N.W. | 68g |
Browse Other Products
-
EU-BUS Debugger Ebus-Node
- Model: Ebus-Node - Input Voltage: 12VDC - Transmission Signal: EU-BUS Signal -
4G Master Gateway
- Model: EUG-IP - Memory: 1 piece 256 m DDR 3