• [breadcrumb]

100-240VAC 5A*2ch SCR Power Amplifier EUPB0205

Short Description:

  • Item No.: EUPB0205
  • Dim Mode: Triac/ELV

Product Detail

Product Tags

100-240VAC 5A*2ch SCR Power Amplifier EUPB0205

Thanks for using EUPB0205. This product is mainly used to amplify the power when the load capacity of TRIAC knob or dimming device isn*t enough. For example, a brand dimmer C output 4 channel leading edge or trailing edge, and the maximum current is 1A/ch.If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the combination of C+ EUPB0205 to amplify the power, which can significantly reduce the cost and facilitate clients to stock up.


1. Receive leading/trailing edge signal of 100-240VAC

2. Two channel leading edge output, the maximum output current of 5A

3. Standard 35mm din rail, easy to install

4. Mainly used to enlarge the load capacity, when triac dimmer or phase cut dimming module used in lighting control system don’t have enough capacity

Technical Parameter

Model EUPB0205
Output Channels 2
Voltage 100-240VAC leading edge
Current 5A/ch
Input Voltage 100-240VAC
Signal 100-240VAC leading/trailing edge signal
Channels of signal 2
Others Dimension 210*96.5*65.4mm(L*W*H), standard 35mm din rail
G.W. 900g
Working temp. -20℃ ~ 50℃
Relative humidity 20~90% RH

  • Previous:
  • Next: