Product selection LED driver, Product selection LED controller, Product selection LED dimmer - Euchips

2A*8ch Leading Edge Controller EUT0802

A*8ch Leading Edge Controller EUT0802 Leading edge controller is a multi-function triac dimmer Control mode of EUT0802 is flexible, which complies with 4 control protocols: 1, support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access to KNX, Dynalite, Lutron, Crestron, LDS and other intelligent dimming network via gateway. 2, support EU-BUS lighting control protocol developed by EUCHIPS. It can be used with relay switch controller, clock module, p...

detail
20A*8ch Relay Switch Controller EUR0820

20A*8ch Relay Switch Controller EUR0820 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM and DALI standard protocol. and output 8 relay control signal . The max current of each channel is 20A,the total 8 channel is 160A . In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below) Featu...

detail
20A*4ch Relay Switch Controller EUR0420

20A*4ch Relay Switch Controller EUR0420 The product adopt advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol ,and EU-BUS protocol developed by EUCHIPS, output 4 relay switch signal and their synchronous 0-10V DC control signal. The max current of each channel of relay switch is 20A,the total 4 channel is 80A , the max current of each channel of 0-10V is 20mA.In addition, the device can be connected into the Dynalite system by the ...

detail
20A*12ch Relay Switch Controller EUR1220

20A*12ch Relay Switch Controller EUR1220 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol, and EU-BUS protocol developed by EUCHIPS, output 12 relay switch signal. The maximum carrying current of each relay switch is 20A,the total 12 channel is 240A.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by t...

detail
Programmable Contact Access Module EUK06

Programmable Contact Access Module EUK06 Features 1. Comply with EU-BUS protocol developed by EUCHIPS 2. Can connect to 6 dry contact signal 3. Can connect 6 LED lights as key backlight 4. Easy to edit the function for each port 5. Supplied via EU-BUS bus, without external power supply 6. Compact, easy to install into the electrical box Technical Parameter Item Parameters Power supply Supplied via EU-BUS bus Protocol EU-BUS The number of dry contact signal 6 The number of extern...

detail
Network Timeclock EUCT01

Network Timeclock EUCT01 In the EU-BUS system, the timeclock interfaces with other devices over the EU-BUS network to automate tasks and trigger time-based events. It may be used as an energy management controller or simply to select scenes at preset times of the day or week. The timeclock is powerful enough to provide full automation of a large commercial project and can be programmed with events that automatically run at a specified time. If required, it can achieve preset scene trig...

detail
EU-BUS To DALI Gateway EUG-DALI

EU-BUS To DALI Gateway EUG-DALI In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign（including reassign,...

detail
EU-BUS To DALI Gateway EUG-DALI-2

EU-BUS To DALI Gateway EUG-DALI-2 In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign（including reassig...

detail
12-24VDC 15mA DALI to 0-10V Analog Signal Converter DALI6000

12V 24V DALI 0-10V Analog Signal Converter DALI6000 Feature 1. DALI to 0-10V Converter 2. 1 channel 0-10V Analog Signal output 3. Drive capability: max 15mA/channel 4. Meets DALI protocol IEC62386/IEC60929 5. Support automatic addressing and address extensions 6. Input VoltageㄩDC12 -24V 7. Security Level: 2 Level Technical Parameter Product Name DALI 0-10V Analog Signal 12V 24V Converter Item DALI6000 Conversion Channel 1 Channel Input Voltage DC12 -24V Input Signal DALI Sig...

detail
24VDC 20mA*4ch DMX to 0-10V Analog Signal Converter PX24608

DMX to 0-10V Analog Signal Converter PX24608 Summarize Thank you for using PX series of DMX512 Decoder. PX series adopt the advanced micro-computer control?technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to 0-10V/1-10V signal.4 Channels output, output driver 20 mA per channel.it can be used to control?0-10V/1-10V dimmer. It is mainly used for signal convert betwwen DMX Master and 0-10V/1-10V(DMX to 1-10V Converter) Dimmer. Feature 1. Meet t...

detail