250W 700~1200mA*1ch 0/1-10V CC Driver ANS250AS-1SMC-OP
700~1200mA*1ch 0/1-10V CC Driver ANS250AS-1SMC-OP
Features
• Input voltage range: 180-528Vac
• Supports isolated dimming (0-10V active signal, PWM signal, resistor)
• Adjustable Output Current (AOC) with Potentiometer
• High Efficiency up to 95.5%
• Auxiliary Power: 12VDC, 200mA
• Support for external DIP switches to adjust power
• Support for external light control switch
• Protection: IUVP,SCP,OVP, OTP
• Input surge protection: Differential mode: 6kV, Common mode: 6kV(ANSI/C82 .77-5-2017)
• 5-year warranty
• Safety according to UL8750
Models
| Model Number | Input VoltageRange | Max. OutputPower | Output VoltageRange | Output CurrentRange |
Default Current |
Efficiency(Typ.) | PF(Typ.) |
THD (Typ.) |
| ANS250AS-1S* |
180-528Vac |
250W |
180-260Vdc |
0.7-1.2A |
1.16A |
95.5% |
0.95 | 7% |
Note:
[1]. All specifications are measured at 25℃ ambient temperature, input voltage 277Vac, and the typical value tested by full load
[2]. AS means 0-10V/PWM/res dimming and 12V auxiliary source.
* Means Additional Function
| Models | 0-10V/PWM/Res dimming | Auxiliary 12V/200mA | DIP switch | Light control switch |
|
ANS250AS-1S |
√ | √ | ||
|
ANS250AS-1SMC |
√ | √ | √ | |
|
ANS250AS-1S-OP |
√ | √ | √ | |
|
ANS250AS-1SMC-OP |
√ | √ | √ | √ |
Technical Parameters
| Model |
ANS250AS-1S* |
||||
| Parameter | Min. | Typ. | Max. |
Remark |
|
|
Input |
Rated Input AC Voltage |
200Vac | - | 480Vac | |
|
Input AC Voltage Range |
180Vac | - | 528Vac |
Reference derating curve |
|
|
Frequency Range |
47Hz | 50/60Hz | 63Hz | ||
|
Input AC Current |
- | - | 1.5A |
At 200Vac input and 100% load |
|
|
Input AC Power |
- | - | 265W |
At 200Vac input and 100% load |
|
|
Leakage Current |
- | - | 0.75MIU |
UL 8750; 277Vac/ 60Hz |
|
| - | - | 0.70mA |
IEC 60598-1; 240Vac/ 60Hz, |
||
|
Inrush Current |
- | - | 55A |
At 200Vac input and 100% load, 25℃ Cold Start |
|
| - | - | 80A |
At 277Vac input and 100% load, 25℃ Cold Start |
||
| - | - | 120A |
At 480Vac input and 100% load, 25℃ Cold Start |
||
|
Standby Power |
- | - | 0.5W |
At 220Vac input and Aux. power without load |
|
|
Power Factor |
0.95 | 0.95 | - |
At 277Vac , 50-60Hz, 100% load |
|
| 0.90 | - | - |
At 200-480Vac , 50-60Hz, 70%-100% load |
||
|
THD |
- | 7% | 10% |
At 277Vac , 50-60Hz, 100% load |
|
| - | - | 20% |
At 200-480Vac, 50-60Hz, 70%-100% load |
||
| Parameter | Min. | Typ. | Max. |
Remark |
|
|
Output |
Output Voltage Range |
180V | - | 260V | |
|
Open Circuit Voltage |
- | - | 310V | ||
|
Output Current Range |
0.70A | - | 1.20A |
Adjustable Output Current with Potentiometer; |
|
|
Efficiency @120Vac |
93.0% | 94.0% | - |
At 100% load and Io=0.96A |
|
|
Efficiency @277Vac |
94.0% | 95.5% | - |
At 100% load and Io=0.96A |
|
|
Efficiency @347Vac |
94.0% | 95.5% | - |
At 100% load and Io=0.96A |
|
|
Output Current Tolerance |
-5% | - | +5% |
At 100% load |
|
|
Output Current Ripple(PK-AV) |
- | 5% | 10% |
At 100% load, 20 MHz BW |
|
|
Startup Overshoot Current |
- | - | 10% |
At 100% load |
|
|
Turn-on Delay Time |
- | - | 1.0s |
At 200~480Vac input and 100% load |
|
|
Line Regulation |
-5% | - | +5% |
At 100% load |
|
|
Load Regulation |
-5% | - | +5% | ||
|
12V Auxiliary Output Voltage |
10.8V | 12V | 13.2V | ||
|
12V Auxiliary Output Current |
- | - | 200mA |
Return terminal is “Dim−“ |
|
| Parameter | Min. | Typ. | Max. |
Remark |
|
|
0-10V Dimming |
Absolute Maximum Voltage |
0V | - | 12V |
On Dim+ Pin |
|
Source Current on Dim+ Pin |
90uA | 110uA | 120uA | ||
|
Dimming Output Range |
10%Ioset | - | 100%Ioset |
Ioset<0.96A, Dimming Min. is 0.096A |
|
|
Recommended Dimming Range for 0-10V |
0V | - | 10V |
Dimming prohibits reverse connection |
|
|
Dim Off |
0.7V | 0.8V | 0.9V |
With afterglow (standard) Without afterglow (optional) |
|
|
Dim On |
0.9V | 1.0V | 1.1V | ||
| PWMDimming |
PWM_in High Level |
9.8V | 10V | 10.2V | |
|
PWM_in Low Level |
0V | - | 0.3V | ||
|
PWM_in Frequency Range |
1KHz | - | 2KHz | ||
|
PWM_in Duty Cycle |
0% | - | 100% | ||
|
Resistor Dimming |
Resistance |
0Kohm | - | 100Kohm |
DIM+ source current 110uA. |
|
Dimming Output Range |
10%Ioset | - | 100%Ioset | ||
|
Other Characteristics |
Operating Temperature For safety(Tc) |
-40℃ | 25℃ | +90℃ | |
|
Operating Temperature For warranty(Tc) |
-40℃ | 25℃ | +85℃ |
Case temperature for 5 years warranty Humidity: 10% RH to 95% RH; |
|
|
Storage Temperature(Ta) |
-40℃ | 25℃ | +85℃ | ||
|
Storage Humidity |
5%RH | - | 95%RH | ||
|
Altitude |
-65m | - | 4000m | ||
|
Temperature Coefficient |
-0.06%/℃ | - | +0.06%/℃ |
Tc:0 ℃~90℃ |
|
|
Input under voltage protection |
- | 165Vac | 180Vac |
Self-recovery |
|
|
Over temperature protection |
90℃ | 95℃ | 100℃ |
Drop current when OTP, and it can be self- recovery after the abnormality is removed. |
|
|
Short Circuit Protection |
- | - | - |
Self-recovery, short circuit without damage |
|
|
Lifetime(Tc≤85℃) |
≥50,000 hours |
At 277Vac,100% load，please refer to lifetime vs. case temperature curve |
|||
|
MTBF |
200, 000 hours |
At 277Vac,80% load,Ta=25 ℃ (MIL-HDBK-217F) |
|||
|
Warranty |
5 years |
Tc ≤ 85℃ |
|||
|
Net Weight |
575g | ||||
|
Dimension |
198mm*52.5mm*33.5mm |
L x W x H |
|||
Note: All the parameters above are tested Ta 25℃ and LED load, unless specified.
