Gateways/Interfaces

Dimming Signal
CC/CV
Input Voltage
Output Voltage
Output Current
Output Power
Output Channel
Application Area
Product Category
Certification
Download CSV Display as Poster
  • Programmable Contact Access Module EUK06

    Programmable Contact Access Module EUK06

    Programmable Contact Access Module EUK06 Features 1. Comply with EU-BUS protocol developed by EUCHIPS 2. Can connect to 6 dry contact signal 3. Can connect 6 LED lights as key backlight 4. Easy to edit the function for each port 5. Supplied via EU-BUS bus, without external power supply 6. Compact, easy to install into the electrical box Technical Parameter Item Parameters Power supply Supplied via EU-BUS bus Protocol EU-BUS The number of dry contact signal 6 The number of extern...
  • Network Timeclock EUCT01

    Network Timeclock EUCT01

    Network Timeclock EUCT01   In the EU-BUS system, the timeclock interfaces with other devices over the EU-BUS network to automate tasks and trigger time-based events. It may be used as an energy management controller or simply to select scenes at preset times of the day or week. The timeclock is powerful enough to provide full automation of a large commercial project and can be programmed with events that automatically run at a specified time. If required, it can achieve preset scene trig...
  • EU-BUS To DALI Gateway EUG-DALI

    EU-BUS To DALI Gateway EUG-DALI

    EU-BUS To DALI Gateway EUG-DALI In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign(including reassign, extent allocation) the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign(including reassign,...
  • EU-BUS To DALI Gateway EUG-DALI-2

    EU-BUS To DALI Gateway EUG-DALI-2

    EU-BUS To DALI Gateway EUG-DALI-2 In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign(including reassign, extent allocation) the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign(including reassig...