Products LED driver, Products LED controller, Products LED dimmer - Euchips

20A*12ch Relay Switch Controller EUR1220

20A*12ch Relay Switch Controller EUR1220 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol, and EU-BUS protocol developed by EUCHIPS, output 12 relay switch signal. The maximum carrying current of each relay switch is 20A,the total 12 channel is 240A.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by t...

detail
0-10V to Triac controller EUA-T0110

0-10V to Triac controller EUA-T0110 This product is mainly used for thyristor dimming power supply, with 0-10V analog signal control of the product. The output is 220V 50Hz or 110V 60Hz to drive the thyristor power supply to achieve easy dimming product wiring and simple control. Features · 0-10V analog signal control 220V 50Hz or 110V 60Hz tangential output · Output single AC front cutting or back cutting, maximum output current 10A · Standard 35mm guide housing for easy installation · Can d...

detail
300W 24VDC Non-dimmable CV Driver LM300-1H24V-A

300W 24VDC Non-dimmable CV Driver LM300-1H24V-A The circuit of this product is simple, stable and reliable. Long aluminum structure, ordinary constant voltage simple terminal input and output Simple installation, can be used in commercial, home, engineering and other projects. Features · Aluminium Casing · Ultra-low start up temp. （-20℃） · Ultra-light and easy to install · High efficiency up to 90% · High reliability · Small size, light weight Technical Parameters Model LM300-1H24V-A ...

detail
100mA*4ch EUBUS Module EUA410D

100mA*4ch EUBUS Module EUA410D Welcome to use EUA410D 0-10V dimming module. This product adopts advanced microcomputer control technology to analyze the DMX512(1990)/RDM widely adopted in the world and the self-developed EU-Bus protocol. It supports RDM address redirection and outputs 4 channels DC 0-10V analog control signals at the same time, with the maximum output signal current of each channel being 100mA. Features · It conforms to DMX512(1990)/RDM international standard protocol and the...

detail
400W 24VDC Non-dimmable CV Driver LM400-1H24V-A

400W 24VDC Non-dimmable CV Driver LM400-1H24V-A The circuit of this product is simple, stable and reliable. Long aluminum structure, ordinary constant voltage simple terminal input and output Simple installation, can be used in commercial, home, engineering and other projects. Features · Aluminium Casing · Ultra-low start up temp. （-20℃） · Ultra-light and easy to install · High efficiency up to 90% · High reliability · Small size, light weight Technical Parameters Model LM400-1H24V-A ...

detail
Programmable Contact Access Module EUK06

Programmable Contact Access Module EUK06 Features 1. Comply with EU-BUS protocol developed by EUCHIPS 2. Can connect to 6 dry contact signal 3. Can connect 6 LED lights as key backlight 4. Easy to edit the function for each port 5. Supplied via EU-BUS bus, without external power supply 6. Compact, easy to install into the electrical box Technical Parameter Item Parameters Power supply Supplied via EU-BUS bus Protocol EU-BUS The number of dry contact signal 6 The number of extern...

detail
Network Timeclock EUCT01

Network Timeclock EUCT01 In the EU-BUS system, the timeclock interfaces with other devices over the EU-BUS network to automate tasks and trigger time-based events. It may be used as an energy management controller or simply to select scenes at preset times of the day or week. The timeclock is powerful enough to provide full automation of a large commercial project and can be programmed with events that automatically run at a specified time. If required, it can achieve preset scene trig...

detail
EU-BUS To DALI Gateway EUG-DALI

EU-BUS To DALI Gateway EUG-DALI In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign（including reassign,...

detail
EU-BUS To DALI Gateway EUG-DALI-2

EU-BUS To DALI Gateway EUG-DALI-2 In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign（including reassig...

detail
21W 500mA Non-dimmable CC Driver DEE21-1H500C

21W 500mA Non-dimmable CC Driver DEE21-1H500C Features · Single constant current output · Short circuit, overcurrent, overload, overvoltage, over-temperature, V0-level flame-retardant housing · High voltage input: 220VAC to 240VAC · Protection grade IP20, suitable for indoor Class II lamps · Compact body and flicker-free design · Lifespan: 50,000 hours, 5-year warranty · Suitable for LED indoor lamps, such as downlights, panel lights, etc. Technical Parameters Model DEE21-1H500C Input I...

detail
23W 600mA Non-dimmable CC Driver DEE23-1H600C

23W 600mA Non-dimmable CC Driver DEE23-1H600C Features · Single constant current output · Short circuit, overcurrent, overload, overvoltage, over-temperature, V0-level flame-retardant housing · High voltage input: 220VAC to 240VAC · Protection grade IP20, suitable for indoor Class II lamps · Compact body and flicker-free design · Lifespan: 50,000 hours, 5-year warranty · Suitable for LED indoor lamps, such as downlights, panel lights, etc. Technical Parameters Model DEE23-1H600C Input ...

detail
200W 650~1000mA*1ch 0/1-10V CC Driver ANS200AS-1BMC-OP

200W 650~1000mA*1ch 0/1-10V CC Driver ANS200AS-1BMC-OP Features • Input voltage range: 108-380Vac • Supports isolated dimming (0-10V active signal, PWM signal, resistor) • Adjustable Output Current (AOC) with Potentiometer • High Efficiency up to 96.0% • Auxiliary Power: 12VDC, 200mA • Support for external DIP switches to adjust power • Support for external light control switch • Protection: IUVP,SCP,OVP, OTP • Input surge protection: Differential mode: 6kV, Common mode: 6kV(ANSI/C82 .77-5-20...

detail