100W 48VDC Phase-cut & 0-10V CV Driver DUCN100AT-1H48V
100W 48VDC Phase-cut & 0-10V CV Driver DUCN100AT-1H48V
DUCN100AT-1H48V is a constant voltage mode output LED driver. This driver supports both leading-edge and trailing-edge dimming. ,0/1-10V to achieve a smooth dimming effect.
Features
- Single channel constant voltage output,2.08A Max
- High input voltage of 220VAC ~ 240VAC
- Dimming range of 1-100%, and dimming effect smooth
- 100% output when no dimming signal input, can be used as normal power supply
- Short-circuit protection, overload protection, overcurrent protection
- IP20, suitable for indoor LED lighting application
Technical Parameters
| Model | DUCN100AT-1H48V | |
| Input | Efficiency | ≥87%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| AC Current(max) | 1.10Amax@230VAC, full load | |
| Inrush Current(max) | Cold start,50A@230VAC | |
| Output | Current / Voltage / Power | 2.08A/48VDC/100W |
| No load output voltage | 48Vmax | |
| Channel | 1 | |
| Voltage Accuracy | ±5% | |
| Turn on delay Time | <1.5s, at230Vac (When the light begins to shine) | |
| Function | Dimming Type | leading and trailing edge, 0/1-10V |
| Dimming Range | 1%-100% | |
| Protection | Short Circuit | Switch off the output power, working automaically after troubleshooting. |
| Over Load | Hiccup, recovers after fault condition is removed | |
| Overcurrent | Hiccup, recovers after fault condition is removed | |
| Safety&EMC | Surge | L-N:1KV L/N-G:2KV |
| Withstand Voltage | I/P-O/P: 1500VAC/1min/5mA | |
| Others | Working Temp. | -20℃~50℃ |
| Storage Temp., Humidity | -40℃~90℃, 20-90%RH | |
| tc | 75℃ | |
| Material | Metal | |
| IP Rating | IP20 | |
| Lifetime | 50,000h@tc:70℃ | |
| Warranty Condition | 5 years | |
| Switch Cycle | 25,000 times | |
| Packing(weight) | Net weight: 300g±5%/PCS; 50PCS/Carton;15kg±5%/Carton; Carton Size: 490*310*197mm(L*W*H) | |
| Dimension | 231*48*29mm(L*W*H) |
