Products LED driver, Products LED controller, Products LED dimmer - Euchips

2ch DALI Gateway KNX-DALI-2

2ch DALI Gateway KNX-DALI-2 Features · Each output channel of the KNX/DALI gateway supports 64 DALI devices, allowing for individual operations such as switching on and off, dimming, and setting brightness values for each DALI device · Global scene control: Each output channel has 16 scenes available for invocation or storage, and the brightness values of the scenes are configured by the debugging software tool DCA or PC software · Group control: Each output channel can be configured with 16 ...

detail
4ch 0-10V Dimming Controller KNX-EUA416

4ch 0-10V Dimming Controller KNX-EUA416 Features · Control the regulator or electronic ballast through the 0-10V interface output; · Equipped with 4-channel 16A switch control; · It has a manual control dimming function; · It has both relative dimming and absolute dimming functions. · It has the function of status report feedback; · It has scene control function; · It has the function of channel LED indication; · The selection function of relay switch state after the bus voltage is restored; ...

detail
75W 24VDC DALI Waterproof Ultra-thin CV Driver UWP75D-1M24V

75W 24VDC Ultra-thin Waterproof DALI Constant Voltage Driver UWP75D-1M24V UWP75D-1M24V is a dimming driver that can provide constant voltage output. Complies with DALI standard protocol IEC 62386. LED driver featuring the dimming by DALI master / Touch DIM(PushDIM) switch, with smooth dimming curve and are flicker free. Features 1. Single channel output with 24V CV direct current 2. Wide voltage input range from 100VAC to 240VAC 3. with built-in active PFC function 4. Meet DALI protocol IEC ...

detail
60W 12VDC Non-dimmable Waterproof CV Driver PEE60-1W12V

60W 12VDC Non-dimmable Waterproof CV Driver PEE60-1W12V Features ·Width voltage input,full power output ·Insolated PC design ·Isolated design,safe and reliable ·Protections:Over load,Short circuit,over voltage ·Protection grades is as high as IP65 ·5 years warranty Technical Parameters Model PEE60-1W12V Input Efficiency ≥86%@230VAC, full load Voltage 120VAC-277VAC Frequency 50/60Hz No load power ≤ 0.5W Current 1.1Amax@120VAC Standby Power There is no Inrush Current Cold s...

detail
2.4G CCT Remote Control RC6

2.4G CCT Remote Control RC6 Features 1. Using 2.4G RF remote control, long distance transmission 2. For adjusting the color temperature and brightness of the lamps 3. Can control a variety of controllers, and can be free to code and clear code 4. Fashion, and easy to use Technical Parameters Item Parameters Power 3VDC(CR2032) Remote Distance 20m Wireless Frequency 2.4Ghz ISM Working Current <20mA Standby Current <4uA Standby Time 6 months Working Tempera...

detail
10W 350~700mA 0/1-10V CC Driver PUP10A-1WMC-700

10W 350~700mA 0/1-10V Constant Current Driver PUP10A-1WMC-700 PUP10A-1WMC-700 is a constant current output mode LED driver. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the users and luminaire system during installation. Features 1. Single channel output, output current level selectable by DIP S.W. 2. Support 3-in-1 dimming mode:0/1-10V active signal, adjustable resistance, PWM(A model) 3. Input voltage of 100VAC ~ 240VAC 4...

detail
96W 12VDC 0/1-10V CV Driver MUP96A-1W12V

96W 12VDC 0/1-10V CC Driver MUP96A-1W12V MUP96A-1W12V is a constant voltage mode output LED driver.This driver can be controlled by external signal (0/1-10V active signal, adjustable resistance and PWM signal) to achieve a smooth dimming effect. Features ·Single channel constant voltage output,8.0A Max ·Support 3-in-1 dimming mode( 0/1-10V active signal, adjustable resistance and PWM signal) ·High input voltage of 120VAC~277VAC ·Dimming range of 1-100%, and dimming effect smooth, no flicker ·...

detail
20W 350/500/550/700mA CC DMX Driver EUP20M-1HMC-0

20W 350/500/550/700mA Constant Current DMX Driver EUP20M-1HMC-0 Feature 1. Single channel output, output current level selectable by DIP S.W. 2. Support DMX512/RDM 3. Wide range of input voltage 200VAC~400VAC 4. Bult-in active PFC function 5. Class 2 power supply. Full protective plastic housing 6. 100% output when no dimming signal input, can be used as normal power supply 7. Dimming effect smooth, no flicker 7. Protections: Short circuit, over load, over temperature 8. Suitable for indoor L...

detail
6ch 0-10V Dimming Controller KNX-EUA616

6ch 0-10V Dimming Controller KNX-EUA616 Features · Control the regulator or electronic ballast through the 0-10V interface output; · Equipped with 6-channel 16A switch control; · It has a manual control dimming function; · It has both relative dimming and absolute dimming functions. · It has the function of status report feedback; · It has scene control function; · It has the function of channel LED indication; · The selection function of relay switch state after the bus voltage is restored; ...

detail
60W 24VDC Non-dimmable Waterproof CV Driver PEE60-1W24V

60W 24VDC Non-dimmable Waterproof CV Driver PEE60-1W24V Features · Width voltage input,full power output · Insolated PC design · Isolated design,safe and reliable · Protections:Over load,Short circuit,over voltage · Comply with UL/FCC CE/SELV · Protection grades is as high as IP65 · 5 years warranty Technical Parameters Model PEE60-1W24V Input Efficiency ≥88%@230VAC, full load ≥86%@120VAC, full load Voltage 120VAC-277VAC Frequency 50/60Hz No load power ≤ 0.5W Current 1.1Amax...

detail
2ch Phase-cut Controller KNX-EUM0210

2ch Phase-cut Controller KNX-EUM0210 Features · It has two independent circuit thyristor dimming outputs · Supports manual control dimming function · It has both relative dimming and absolute dimming functions · It has the function of status report feedback · It is equipped with a timed cycle function, which can achieve staircase light control and cyclic flashing control · It has on-site preservation and restoration functions · It has the function of scene combination control · Dimming lamp r...

detail
2.4G RGBW Remote Control RC7

2.4G RGBW Remote Control RC7 Features ·Using 2.4G RF remote control, long distance transmission ·For adjusting the full-color, brightness, and mode change of the lamps ·Can control a variety of controllers, and can be free to code and clear code ·Fashion, and easy to use Technical Parameters Item Parameters Power 3VDC(CR2032) Remote Distance 20m Wireless Frequency 2.4Ghz ISM Working Current <20mA Standby Current <4uA Standby Time 6 months Working Temperature -30℃~55℃ ...

detail