Products LED driver, Products LED controller, Products LED dimmer - Euchips

15A*2ch Data Repeater RP520

15A*2ch Data Repeater RP520 Thanks for using our Power Repeater. Before using this product, please read this manual carefully and check if there’s any defect during transportation before use, if so please don’t use and inform your supplier immediately. Features ● For the power of synchronous change signal amplification ● High power of each output ● High-speed process data, no delay, no flicker ● Acceptable PWM control ● DC12-24V wide voltage input ● CCT two-channel signal control, 15A per cha...

detail
12-24VDC 10A*3ch Power Amplifier RP530

12-24vdc 10A 3 channel led power amplifier RP530 Feature 1. For the power of synchronous change signal amplification 2. High power of each output 3. High-speed process data, no delay, no flicker 4. Acceptable PWM control 5. DC12-24V wide voltage input 6. 3 Channel RGB control, 10A per channel 7. Applicable any LED module Technical Parameter Product Name 12-24vdc 10A 3 channel led power amplifier RP530 Item RP530 Input voltage DC12V~24V Signal Output RGB Max. Load Current 10A/CH * 3...

detail
12-24VDC 15mA DALI to 0-10V Analog Signal Converter DALI6000

12V 24V DALI 0-10V Analog Signal Converter DALI6000 Feature 1. DALI to 0-10V Converter 2. 1 channel 0-10V Analog Signal output 3. Drive capability: max 15mA/channel 4. Meets DALI protocol IEC62386/IEC60929 5. Support automatic addressing and address extensions 6. Input VoltageㄩDC12 -24V 7. Security Level: 2 Level Technical Parameter Product Name DALI 0-10V Analog Signal 12V 24V Converter Item DALI6000 Conversion Channel 1 Channel Input Voltage DC12 -24V Input Signal DALI Sig...

detail
100W 24VDC Non-dimmable Waterproof CV Driver PES100-1W24V

100W 24VDC Non-dimmable Waterproof CV Driver PES100-1W24V Features · Full power output · Insolated PC design · Isolated design,safe and reliable · Protections:Over load,Short circuit,over Current · Protection grades is as high as IP65 · 5 years warranty · No Flicker Technical Parameters Model PES100-1W24V Input Efficiency >88%@230VAC, Full load Voltage 120VAC-277VAC Frequency 50/60Hz Power Factor ≥0.95@230VAC, Full load THD <10%@230VAC, Full load Cu...

detail
24VDC 20mA*4ch DMX to 0-10V Analog Signal Converter PX24608

DMX to 0-10V Analog Signal Converter PX24608 Summarize Thank you for using PX series of DMX512 Decoder. PX series adopt the advanced micro-computer control?technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to 0-10V/1-10V signal.4 Channels output, output driver 20 mA per channel.it can be used to control?0-10V/1-10V dimmer. It is mainly used for signal convert betwwen DMX Master and 0-10V/1-10V(DMX to 1-10V Converter) Dimmer. Feature 1. Meet t...

detail
12-22.5Vdc DALI to 0-10V Converter EUD-A02

12-22.5Vdc DALI to 0-10V Converter EUD-A02 The DA-010 is a non-isolated signal converter translating the DALI command into 0-10V dimmng signal for LED driver with 0-10V dimming control. This design complies to IEC 62386-101, 102, 207 DALI standard protocol. It is a perfect solution to convert standard fixture to be controlled in DALI control environment. Technical Parameters Model EUD-A02 OUTPUT Output Voltage 0-10Vdc Output 0-10 SINK Current ≤ 2mA Voltage Tolerance ±5% INPUT V...

detail
100-240VAC DALI to Phase Cut Signal Converter DALI-GSC-5

100-240VAC DALI to Phase Cut Signal Converter DALI-GSC-5 Features · Comply with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2 · Thyristor phase-cutting dimming controller supporting DALI and Touch DIM dimming · Controlled LED thyristor dimming power supply, incandescent lamp, AC low voltage lamp, etc · Wide voltage input 100-240VAC · One DALI address, one channel output, maximum output current is 1.8A Technical Parameters Input control signal DALI signal or Touch switch signal ...

detail