Products LED driver, Products LED controller, Products LED dimmer - Euchips

60W 0/1-10V & Triac/ELV CC Driver EULP60ATS-1WPC-WS-1200

Features Single channel output, output current can be Programmable by software Support 0/1-10V ,Potentiometer,PWM,Triac/ELV Dimming TRIAC and ELV dimming at 120 Vac only Protections: Overload and short-circuit UL Class P, Class 2 Output Safety according to UL8750 & UL 1310 Suitable for Dry , Damp Locations Suitable for indoor LED lighting application Technical Parameters Model EULP60ATS-1WPC-WS-1200 Input Efficiency >84%@120VAC, >86%@277VAC Full load Frequency 0/50/60Hz ...

detail
80W D4i CC Driver SCP80D4S-1H1050NC

Features Input voltage range: 176-305Vac. Constant power design and Constand current mode. Adjustable Output Current (AOC) with NFC or DALI-2 programmer. AC Dim and 3-modes Timer. DALI-2 &D4i Certified(Part 150/250/251/252/253). Constant lumen output(CLO). Auxiliary power supply: 24V/125mA. Integrated 16Vdc Bus power supply based on DALI-2 isolated constant voltage design. Stand-by power: < 0.5 W. Over temperature protection via external NTC. Built-in power metering with ±1% accuracy....

detail
60W 12VDC Non-dimmable Waterproof CV Driver LWP60-1W12V-T

60W 12VDC Non-dimmable Waterproof CV Driver LWP60-1W12V-T Features · Ambient Temperature: (-20 to +60) ℃ · Ripple: ≤240mV (p-p) · Certifications: CE + UL compliant · Surge Protection:L-N: 6KV L-G: 6KV N-G: 6KV · Compact Size · Waterproof Connector Supported · Short circuit, Overload, Overcurrent, Over-Temperature Protection (OTP) · Suitable for Dry, Damp & Wet Locations Technical Parameters Model LWP60-1W12V-T Input Voltage 120VAC-277VAC,108-280VDC Frequency...

detail
Enclosures For Remote Dimming Drivers EUA-IPS-H104

Enclosures For Remote Dimming Drivers EUA-IPS-H104 All remote drivers require enclosures by code. Euchips makes your specification process easier by offering different driver enclosures to fulfill all of your project needs. See options below. 6-Driver pre-wired Enclosure houses up to 6 dimming drivers.

detail
21W 150~500mA*1ch 0/1-10V CC Driver RWP21AS-1HMC

21W 150~500mA*1ch 0/1-10V CC Driver RWP21AS-1HMC RWP21AS-1HMC is a 21W 0-10V dimming constant-current LED driver equipped with a auxiliary power supply, an 8-position current DIP switch and ultra-wide output voltage of 10-42V. With its compact body design and round shell, it is widely used in downlights and spotlights. Features Single-channel constant current output Supports 12V 100mA auxiliary source, and can be customized to 5V 100mA Input voltage range: 198VAC – 264VAC Double-stage ...

detail
24VDC 20mA*4ch DMX to 0-10V Analog Signal Converter PX24608

DMX to 0-10V Analog Signal Converter PX24608 Summarize Thank you for using PX series of DMX512 Decoder. PX series adopt the advanced micro-computer control?technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to 0-10V/1-10V signal.4 Channels output, output driver 20 mA per channel.it can be used to control?0-10V/1-10V dimmer. It is mainly used for signal convert betwwen DMX Master and 0-10V/1-10V(DMX to 1-10V Converter) Dimmer. Feature 1. Meet t...

detail
12-22.5Vdc DALI to 0-10V Converter EUD-A02

12-22.5Vdc DALI to 0-10V Converter EUD-A02 The DA-010 is a non-isolated signal converter translating the DALI command into 0-10V dimmng signal for LED driver with 0-10V dimming control. This design complies to IEC 62386-101, 102, 207 DALI standard protocol. It is a perfect solution to convert standard fixture to be controlled in DALI control environment. Technical Parameters Model EUD-A02 OUTPUT Output Voltage 0-10Vdc Output 0-10 SINK Current ≤ 5mA Voltage Tolerance ±5% INPUT Vol...

detail
100-240VAC DALI to Phase Cut Signal Converter DALI-GSC-5

100-240VAC DALI to Phase Cut Signal Converter DALI-GSC-5 Features · Comply with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2 · Thyristor phase-cutting dimming controller supporting DALI and Touch DIM dimming · Controlled LED thyristor dimming power supply, incandescent lamp, AC low voltage lamp, etc · Wide voltage input 100-240VAC · One DALI address, one channel output, maximum output current is 1.8A Technical Parameters Input control signal DALI signal or Touch switch signal ...

detail
96W 24VDC 0/1-10V & Triac/ELV Waterproof CV Driver Driver UWP96AT-1W24V

Features · Single channel constant voltage output, Output Current 4A Max · Input Voltage Range 108-305Vac · Support 0-10V ,Potentiometer,PWM,Triac/ELV Dimming · TRIAC and ELV dimming at 120 Vac only · 0-10V Dimming range of 0.1-100%, and dimming effect smooth, flicker free · 100% output when no dimming signal input, can be used as normal power supply · Protection: Overload; short circuit; Overcurrent · Safety according to UL8750 &UL 1310 · Suitable for Dry , Damp & Wet Locations Tec...

detail
120W D4i CC Driver SCP120D4S-1H1050NC

Features Input voltage range: 176-305Vac. Constant power design and Constand current mode. Adjustable Output Current (AOC) with NFC or DALI-2 programmer. AC Dim and 3-modes Timer. DALI-2 &D4i Certified(Part 150/250/251/252/253). Constant lumen output(CLO). Auxiliary power supply: 24V/125mA. Integrated 16Vdc Bus power supply based on DALI-2 isolated constant voltage design. Stand-by power: < 0.5 W. Over temperature protection via external NTC. Built-in power metering with ±1% accuracy....

detail
300W 24VDC DALI CV Driver LM300D-1H24V-A

300W 24VDC DALI CV Driver LM300D-1H24V-A LM300D-1H24V-A is a constant voltage mode output LED driver. This driver complies with DALI standard protocol IEC 62386,provides dimming function DALI and Touch DIM to achieve a smooth dimming effect. Features · Single channel constant voltage output,12.5A Max · Meet DALI protocol IEC 62386 · Dimming effect smooth, no flicker · Overload protection, overcurrent protection, short circuit protection · IP20, suitable for indoor LED lighting application Tec...

detail