Product selection LED driver, Product selection LED controller, Product selection LED dimmer - Euchips

12-24VDC 8A*2ch CV 0-10V Dimmer DIM-S2L8V-0

12-24VDC 0-10V analog constant voltage led dimmer DIM-S2L8V-0 Feature 1. Support 3-in-1 dimming function(0-10V /1-10V active signal, Adjustable resistance, PWM) 2. Support dimming mode selection 3. Support the short circuit, over current protection and alarm function 4. Logarithmic dimming curve 5. Built-in CCT adjust mode, the user can adjust color temperature without changing the output power 6. For adjusting the brightness/ color temperature of LED strip Technical Parameter Product Name...

detail
12-24VDC 5A*3ch CV 0-10V Dimmer DIM116

12V 24VDC 3 Channels Constant Voltage Dimmer DIM116 Feature 1. Analog Signal driver, receive DC0-10V dim signal. 2. RGB three channels output, Max.5A per channel. 3.?It is applicable to various LED modules Technical Parameter Product Name 12V 24VDC 3 Channels Constant Voltage Dimmer Item DIM116 Input voltage DC12-24V Input & output channel 3 channel, Max.5A per channel Output power 12V≒180W; 24V≒360W Size 165(L)X39(W)X26(H) mm Weight 260g

detail
40W 850~1200mA Non-dimmable CC Driver PUP40-1WMC-1200

40W 1200mA Constant Current Driver PUP40-1WMC-1200 PUP40-1WMC-1200 is a constant current output mode LED driver. The output circuit are also completely in accordance with the new regulations with isolation to ensure the users and luminaire system during installation. Features · Single channel output, output current level selectable by DIP S.W. · Input voltage of 120VAC ~ 277VAC · flicker free · Protections: Short circuit, Over load，Over voltage · Suitable for indoor LED lighting application ...

detail
12-24VDC 15A*1ch CV 1-10V Dimmer DIM119

12-24VDC 1-10V Constant Voltage Dimmer DIM119 Feature 1. Single channel constant voltage output. 2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM) 3. Dimming range from 0.1-100%. 4. 100% output when no dimming signal input. 5. PWM digital dimming, no later LED color rendering index 6. Suitable for indoor LED lighting application. 7. Compatible with various of interfaces of the branded lighting control systems. Technical Parameter Model DIM119 Output Voltage ...

detail
12-24DC 15A*1ch CV 0-10V Dimmer Multidim-15V-0

12V 24V DC 1 Channel Constant Voltage Dimmable Driver Multidim-15V-0 This is a multi-functional LED dimmer, dimming mode, dimming curve, min brightness level all can be selected by dip switch. Product Name: 12V 24V DC 1 Channel Constant Voltage Dimmable Driver ModelㄩMultidim-15V-0 Input Voltageㄩ DC12/24V Loadable current 15A Material ABS+PC Output Powerㄩ 180W/12V, 360W/24V Working Tempㄩ -35⊥ㄜ55⊥ Packing Sizeㄩ L167℅W52℅H24(mm) Protection(with warring led) Short-cir...

detail
5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405

5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405 The product adopts advanced MOS-FET control technology, can accurately realize the phase cut function, and has no requirement for the type or capacity of load. The compatibility is far superior to leading edge controller. Control mode of EUMA0405 is flexible, which complies with 4 control protocols: 1, support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access KNX, Dynalite, Lutron, Crestron,...

detail
2A*8ch Leading Edge Controller EUT0802

A*8ch Leading Edge Controller EUT0802 Leading edge controller is a multi-function triac dimmer Control mode of EUT0802 is flexible, which complies with 4 control protocols: 1, support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access to KNX, Dynalite, Lutron, Crestron, LDS and other intelligent dimming network via gateway. 2, support EU-BUS lighting control protocol developed by EUCHIPS. It can be used with relay switch controller, clock module, p...

detail
20A*8ch Relay Switch Controller EUR0820

20A*8ch Relay Switch Controller EUR0820 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM and DALI standard protocol. and output 8 relay control signal . The max current of each channel is 20A,the total 8 channel is 160A . In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below) Featu...

detail
20A*4ch Relay Switch Controller EUR0420

20A*4ch Relay Switch Controller EUR0420 The product adopt advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol ,and EU-BUS protocol developed by EUCHIPS, output 4 relay switch signal and their synchronous 0-10V DC control signal. The max current of each channel of relay switch is 20A,the total 4 channel is 80A , the max current of each channel of 0-10V is 20mA.In addition, the device can be connected into the Dynalite system by the ...

detail
20A*12ch Relay Switch Controller EUR1220

20A*12ch Relay Switch Controller EUR1220 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol, and EU-BUS protocol developed by EUCHIPS, output 12 relay switch signal. The maximum carrying current of each relay switch is 20A,the total 12 channel is 240A.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by t...

detail
Programmable Contact Access Module EUK06

Programmable Contact Access Module EUK06 Features 1. Comply with EU-BUS protocol developed by EUCHIPS 2. Can connect to 6 dry contact signal 3. Can connect 6 LED lights as key backlight 4. Easy to edit the function for each port 5. Supplied via EU-BUS bus, without external power supply 6. Compact, easy to install into the electrical box Technical Parameter Item Parameters Power supply Supplied via EU-BUS bus Protocol EU-BUS The number of dry contact signal 6 The number of extern...

detail
Network Timeclock EUCT01

Network Timeclock EUCT01 In the EU-BUS system, the timeclock interfaces with other devices over the EU-BUS network to automate tasks and trigger time-based events. It may be used as an energy management controller or simply to select scenes at preset times of the day or week. The timeclock is powerful enough to provide full automation of a large commercial project and can be programmed with events that automatically run at a specified time. If required, it can achieve preset scene trig...

detail