Control System Devices LED driver, Control System Devices LED controller, Control System Devices LED dimmer

100-240VAC 10A*1ch SCR Power Amplifier EUPB0110

100-240VAC 10A*1ch SCR Power Amplifier EUPB0110 Thanks for using EUPB0110. This product is mainly used to amplify the power when the load capacity of TRIAC knob or dimming device isn＊t enough. For example, a brand dimmer C output 4 channel leading edge or trailing edge, and the maximum current is 1A/ch.If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose th...

detail
100-240VAC 5A*2ch SCR Power Amplifier EUPB0205

100-240VAC 5A*2ch SCR Power Amplifier EUPB0205 Thanks for using EUPB0205. This product is mainly used to amplify the power when the load capacity of TRIAC knob or dimming device isn＊t enough. For example, a brand dimmer C output 4 channel leading edge or trailing edge, and the maximum current is 1A/ch.If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the...

detail
5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405

5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405 The product adopts advanced MOS-FET control technology, can accurately realize the phase cut function, and has no requirement for the type or capacity of load. The compatibility is far superior to leading edge controller. Control mode of EUMA0405 is flexible, which complies with 4 control protocols: 1, support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access KNX, Dynalite, Lutron, Crestron,...

detail
2A*8ch Leading Edge Controller EUT0802

A*8ch Leading Edge Controller EUT0802 Leading edge controller is a multi-function triac dimmer Control mode of EUT0802 is flexible, which complies with 4 control protocols: 1, support the international widely adopted DMX-512 (1990) /RDM and DALI standard protocol, and can access to KNX, Dynalite, Lutron, Crestron, LDS and other intelligent dimming network via gateway. 2, support EU-BUS lighting control protocol developed by EUCHIPS. It can be used with relay switch controller, clock module, p...

detail
20A*8ch Relay Switch Controller EUR0820

20A*8ch Relay Switch Controller EUR0820 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM and DALI standard protocol. and output 8 relay control signal . The max current of each channel is 20A,the total 8 channel is 160A . In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below) Featu...

detail
20A*4ch Relay Switch Controller EUR0420

20A*4ch Relay Switch Controller EUR0420 The product adopt advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol ,and EU-BUS protocol developed by EUCHIPS, output 4 relay switch signal and their synchronous 0-10V DC control signal. The max current of each channel of relay switch is 20A,the total 4 channel is 80A , the max current of each channel of 0-10V is 20mA.In addition, the device can be connected into the Dynalite system by the ...

detail
20A*12ch Relay Switch Controller EUR1220

20A*12ch Relay Switch Controller EUR1220 The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol, and EU-BUS protocol developed by EUCHIPS, output 12 relay switch signal. The maximum carrying current of each relay switch is 20A,the total 12 channel is 240A.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by t...

detail
0-10V to Triac controller EUA-T0110

0-10V to Triac controller EUA-T0110 This product is mainly used for thyristor dimming power supply, with 0-10V analog signal control of the product. The output is 220V 50Hz or 110V 60Hz to drive the thyristor power supply to achieve easy dimming product wiring and simple control. Features · 0-10V analog signal control 220V 50Hz or 110V 60Hz tangential output · Output single AC front cutting or back cutting, maximum output current 10A · Standard 35mm guide housing for easy installation · Can d...

detail
100mA*4ch EUBUS Module EUA410D

100mA*4ch EUBUS Module EUA410D Welcome to use EUA410D 0-10V dimming module. This product adopts advanced microcomputer control technology to analyze the DMX512(1990)/RDM widely adopted in the world and the self-developed EU-Bus protocol. It supports RDM address redirection and outputs 4 channels DC 0-10V analog control signals at the same time, with the maximum output signal current of each channel being 100mA. Features · It conforms to DMX512(1990)/RDM international standard protocol and the...

detail
Programmable Contact Access Module EUK06

Programmable Contact Access Module EUK06 Features 1. Comply with EU-BUS protocol developed by EUCHIPS 2. Can connect to 6 dry contact signal 3. Can connect 6 LED lights as key backlight 4. Easy to edit the function for each port 5. Supplied via EU-BUS bus, without external power supply 6. Compact, easy to install into the electrical box Technical Parameter Item Parameters Power supply Supplied via EU-BUS bus Protocol EU-BUS The number of dry contact signal 6 The number of extern...

detail
Network Timeclock EUCT01

Network Timeclock EUCT01 In the EU-BUS system, the timeclock interfaces with other devices over the EU-BUS network to automate tasks and trigger time-based events. It may be used as an energy management controller or simply to select scenes at preset times of the day or week. The timeclock is powerful enough to provide full automation of a large commercial project and can be programmed with events that automatically run at a specified time. If required, it can achieve preset scene trig...

detail
EU-BUS To DALI Gateway EUG-DALI

EU-BUS To DALI Gateway EUG-DALI In the EU-BUS system, the user can control the equipment complying with DALI standard protocol via EUG-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance. Features 1. Assign（including reassign,...

detail