English
Chinese

Others

Dimming Signal
CC/CV
Input Voltage
Output Voltage
Output Current
Output Power
Output Channel
Application Area
Product Category
Certification
Download CSV Display as Poster
  • Bus Power Supply KNX-EUP640

    Bus Power Supply KNX-EUP640

    Bus Power Supply KNX-EUP640  Features · The EIB/KNX bus power supply is used to provide and monitor the voltage of the EIB/KNX system, and the output has two terminals One is used for EIB bus power supply and signal transmission, and the other is used for auxiliary power supply and can provide a 30V DC power supply voltage to the terminal equipment. The bus connection end has integrated reactors inside the power supply. If an external reactor is connected to the auxiliary power supply termina...
    detail
  • Multi-functional Bus Control Gateway KNX-EUTR

    Multi-functional Bus Control Gateway KNX-EUTR

    Multi-functional Bus Control Gateway KNX-EUTR Features · Equipped with coupler function, coupling different KNX branch lines · KNX lines with the same group ID can be set to communicate with each other, while KNX lines with different group IDs can communicate without interfering with each other · It can communicate with the WINCONTROL intelligent lighting system integrated control software on the upper computer · 4 RS485 standard interfaces (customizable) · 4 dry contact I/O contact signal in...
    detail
  • Indoor Microwave Sensor KNX-EUR05

    Indoor Microwave Sensor KNX-EUR05

    Indoor Microwave Sensor KNX-EUR05 Features · Illuminance sensing function · Micro-movement/movement detection function · The sensitivity of the adjustable mobile detection function · Networking function with master-slave sensor control · It features an illuminance sensing function with three types of output data, and the values can be sent in a loop · It features a mobile monitoring function with three types of output data, and the values can be sent in a loop · It has the function of turning...
    detail
  • Infrared Mobile Sensor KNX-EUR02

    Infrared Mobile Sensor KNX-EUR02

    Infrared Mobile Sensor KNX-EUR02 Features · The function of cyclic output of illuminance values · 2 illuminance control channels, capable of outputting 1-bit, 4-bit, and 1-byte data · Infrared movement trigger control function · Infrared movement and brightness logic function · The master-slave function of infrared movement · The channel control output function for enabling or disabling the movement of illuminance and infrared through the object · The function of combining illuminance and mov...
    detail
  • 12 Channel Current Detection Execution Module KNX-EUK1220

    12 Channel Current Detection Execution Module KNX-EUK1220

    12 Channel Current Detection Execution Module KNX-EUK1220 Features · Independently control the lights/loads of 12 circuits · It is equipped with a manual strong cutting dial and the relay has magnetic hold function · It has the functions of delayed on/off, timed off and cyclic on/off · Status value query reply (feedback) function · The selection function of the relay switch state when the bus is powered off and after the voltage is restored · It has the function of scene combination control t...
    detail
  • 8-Way Current Detection Execution Module KNX-EUK820

    8-Way Current Detection Execution Module KNX-EUK820

    8-Way Current Detection Execution Module KNX-EUK820 Features · Independently control the lights/loads of 8 circuits · It is equipped with a manual strong cutting dial and the relay has magnetic hold function · It has the functions of delayed on/off, timed off and cyclic on/off · Status value query reply (feedback) function · The selection function of the relay switch state when the bus is powered off and after the voltage is restored · It has the function of scene combination control to meet ...
    detail
  • 4-Channel Current Detection Execution Module KNX-EUK420

    4-Channel Current Detection Execution Module KNX-EUK420

    4-Channel Current Detection Execution Module KNX-EUK420 Features · Independently control the lights/loads of 4 circuits · It is equipped with a manual strong cutting dial and the relay has magnetic hold function · It has the functions of delayed on/off, timed off and cyclic on/off · Status value query reply (feedback) function · The selection function of the relay switch state when the bus is powered off and after the voltage is restored · It has the function of scene combination control to m...
    detail
  • 1ch DALI Gateway KNX-DALI-1

    1ch DALI Gateway KNX-DALI-1

    1ch DALI Gateway KNX-DALI-1 Features · Each output channel of the KNX/DALI gateway supports 64 DALI devices, allowing for individual operations such as switching on and off, dimming, and setting brightness values for each DALI device · Global scene control: Each output channel has 16 scenes available for invocation or storage, and the brightness values of the scenes are configured by the debugging software tool DCA or PC software · Group control: Each output channel can be configured with 16 ...
    detail
  • 2ch DALI Gateway KNX-DALI-2

    2ch DALI Gateway KNX-DALI-2

    2ch DALI Gateway KNX-DALI-2 Features · Each output channel of the KNX/DALI gateway supports 64 DALI devices, allowing for individual operations such as switching on and off, dimming, and setting brightness values for each DALI device · Global scene control: Each output channel has 16 scenes available for invocation or storage, and the brightness values of the scenes are configured by the debugging software tool DCA or PC software · Group control: Each output channel can be configured with 16 ...
    detail
  • IP Router KNX-EUG-IP

    IP Router KNX-EUG-IP

    IP Router KNX-EUG-IP Features KNX-EUG-IP is a KNX IP router that integrates the functions of KNXnet/IP gateway and KNX router. Its main features are as follows: · It follows the standard KNXnet/IP protocol and can provide standard bus device configuration, management, download and other functions as a KNXnet/IP server · Supports up to 5 clients for connection and communication · The router function can be used as a KNX branch coupler, area coupler and multi-area coupler · With a communication...
    detail
  • Curtain Gateway KNX-EUIG

    Curtain Gateway KNX-EUIG

    Curtain Gateway KNX-EUIG Features The KNX-485 curtain gateway can be used to control the 485 curtain motor for KNX devices · There are two channels, and each channel can control up to 10 curtain motors at most. A total of 20 curtain motor positions can be allocated · It supports scene functions. Each curtain motor has 12 scene numbers, meaning there are 12 scenes available for allocation · It can perform 8-bit scene control and call the preset scene functions · It can perform functions such a...
    detail
  • 8-way Universal Interface Module KNX-EUIO-08

    8-way Universal Interface Module KNX-EUIO-08

    8-way Universal Interface Module KNX-EUIO-08 Features · It can be used for turning on and off lighting, opening and closing curtains, raising and lowering projection screens, etc. It has the functions of long press, short press and reversing · It can control the dimming equipment and has the function output of relative dimming and absolute dimming · Interchangeable dimming and curtains, fixed value sending function · It can perform 8-bit scene control and call the preset scene functions · It ...
    detail
Hit enter to search or ESC to close